Hitachi CP-A300N User Manual page 65

Item
SETUP
(continued)
(continued on next page)
Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS.
This function can only be used when DHCP is set
to OFF.
IP ADDRESS
• The IP ADDRESS is the number that identifies
this projector on the network. You cannot have two
devices with the same IP ADDRESS on the same
network.
• The IP ADDRESS "0.0.0.0" is prohibited.
Use the ▲/▼/◄/► buttons to enter the same
SUBNET MASK used by your computer.
SUBNET
This function can only be used when DHCP is set
MASK
to OFF.
• The SUBNET MASK "0.0.0.0" is prohibited.
Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (a node on a computer network that
DEFAULT serves as an access point to another network)
GATEWAY address.
This function can only be used when DHCP is set
to OFF.
Use the ▲/▼/◄/► buttons to input the DNS
server address.
DNS SERVER
The DNS server is a system to control domain
names and IP addresses on the Network.
Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as the one
TIME
set on your computer. If unsure, consult your IT
DIFFERENCE
manager.
Use the ► button to return to the menu after
setting the TIME DIFFERENCE.
Use the ▲/▼/◄/► buttons to enter the Year (last
two digits), Month, Date, Hour and Minute.
DATE AND
• The projector will override this setting and retrieve
TIME
DATE AND TIME information from the Time server
when SNTP is enabled. ( Date/Time Settings
in the User's Manual - Network Guide)
Description
NETWORK menu
65