Temporarily Freezing The Screen; Temporarily Blanking The Screen - Hitachi CP-A300N User Manual

Temporarily freezing the screen

1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu (49)), and the
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
● Images might appear degraded when this function is operated, but it is not a
malfunction.

Temporarily blanking the screen

1.
Press BLANK button on the remote control.
The BLANK screen will be displayed instead of the screen of
input signal. Please refer to BLANK item in SCREEN menu
(47).
To exit from the BLANK screen and return to the input signal
screen, press BLANK button again.
● The projector automatically exits from the BLANK mode when
some control buttons are pressed.
CAUTION
is on, use the BLANK function above.
Taking any other action may cause the damage on the projector.
NOTE
• The sound is not connected with the BLANK screen function. If
necessary, set the volume or mute first. To display the BLANK screen and mute
the sound at one time, use AV MUTE function (57).
►If you wish to have a blank screen while the projector's lamp
Operating
FREEZE button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON ＋
DOWN
OFF
ー
KEYSTONE MY BUTTON
MUTE
1 2
FOCUS D-ZOOM
- + - +
MENU
POSITION
ENTER
RESET
ESC
BLANK button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
＋
DOWN
OFF
ー
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
MENU
POSITION
ENTER
ESC RESET
27