BenQ MP721 - XGA DLP Projector User Manual page 55

Indicators
Illustration
• Blank -: Light OFF
• : Light flashing
• : Light ON
Light
Power Temp Lamp
Power events
O O
-
O
-
G
-
G
O
-
-
O
Lamp events
-
O
- -
Status & Description
The projector has just been connected to a power outlet.
O
-
Stand-by mode.
- Powering up.
- Normal operation.
1. The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
-
process. Or
2. The projector needs to cool for 90 seconds after the
power is turned off.
The projector has shutdown automatically. If you try to re-start
- the projector, it will shutdown again. Please contact your dealer
for assistance.
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
R
for assistance.
1. The projector needs 90 seconds to cool down. Or
R
2. Please contact your dealer for assistance.
O
• : Orange light
• R: Red light
• G: Green light
Maintenance 51