Connecting Video Source Devices - BenQ MP721 - XGA DLP Projector User Manual

Connecting Video source devices

This section describes how to connect the projector to Video source devices using video
cables. Video cable connections are recommended for Video presentations.
This projector also supports data (graphic) "PC" connection using wireless function. Wireless
connection is not recommended for Video presentations. See
(optional)" on page
You can connect your projector to various Video source devices that provide any one of the
following output sockets:
• DVI
• Component Video
• S-Video
• Video (composite)
You need only connect the projector to a Video source device using just one of the above
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the Video source device as described below:
Best video quality
The best available video connection method is DVI. If your source device is equipped with a
DVI socket, based on the type of DVI connector you have, you can enjoy digital or high-end
analog video quality.
See "Connecting a Component Video source device" on page 21
projector to a DVI source device and other details.
If no DVI source is available, the next best video signal is Component Video (not to be
confused with composite Video). Digital TV tuners and DVD players output Component
Video natively, so if available on your devices, they should be your connection method of
choice in preference to S-Video or (composite) Video.
See "Connecting a Component Video source device" on page 21
projector to a component video device.
Better video quality
The S-Video method provides a better quality analog video than standard composite Video.
If you have both composite Video and S-Video output terminals on your Video source
device, you should elect to use the S-Video option.
See "Connecting an S-Video source device" on page 23
an S-Video device.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but less than
optimal result from your projector, being the least video quality of the available methods
described here.
See "Connecting a composite Video source device" on page 24
projector to a composite Video device.
Connecting Audio
The projector has a built-in mono speaker which is designed to provide basic audio
functionality accompanying data presentations for business purposes only. It is not designed
for, nor intended for stereo audio reproduction use as might be expected in home theatre or
home cinema applications. Any stereo audio input (if provided), is mixed into a common
mono audio output through the projector speaker.
20 Connection
17.
"Wireless connection
for how to connect the
for how to connect the
for how to connect the projector to
for how to connect the