Advanced Menu - BenQ MP721 - XGA DLP Projector User Manual

Advanced menu

FUNCTION
(default setting
/ value)
Mirror (Floor
front)
Source Scan
(on)
Language
(English)
Splash
Screen
(BenQ logo)
DESCRIPTION
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
Refer to "Choosing a location" on page 12
Sets whether the projector searches automatically for input signals. If the
source scan is On, the projector will scan for input signals until it acquires
a signal. If the function is not activated, the projector selects the last used
input signal. The default value is 'RGB'.
Language sets the language for the OSD control menus.
Use Left 3/Right 4on the projector or remote control to select your
desired language.
Allows you to select which logo screen will display during projector start-
up. Four modes are available: BenQ logo, Black screen, Blue screen or
MyScreen.
for more information.
Operation 43