BenQ MP721 - XGA DLP Projector User Manual page 26

The final connection path should be like that shown in the following diagram:
• The projector is only capable of playing mixed mono audio, even if a stereo audio input
is connected. See
• Component Video is the only video output that delivers native 16:9 aspect ratio picture.
If you connect the projector to a High Definition TV (HDTV) tuner, the following standards
are supported:
• 480i
• 576i
• 720p (50/ 60 Hz)
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
22 Connection
A/V device
Component Video to
VGA (D-Sub) adaptor
cable
"Connecting Audio" on page 20
Audio cables
DVI
cables
for details.
• 480p
• 576p
• 1080i (50/ 60 Hz)