Controls And Functions - BenQ MP721 - XGA DLP Projector User Manual

Controls and functions

Projector
1. Power (Refer to
36 for more information.)
Turns the projector on or off.
2. Blank/Q? (Refer to
page 36
Used to hide the screen image. You can press any key on the control panel to bring the
image back.
To start FAQ function, press and hold for 3 seconds.
3. Mode (Refer to
Sequentially selects a predefined picture setting available for each input.
When a wireless module is installed and the Wireless Connection menu is displayed,
press this button to change among LAN, IEEE 802.11 a, and IEEE 802.11 b/g. (The
wireless module is available through BenQ retailers.)
4. Source (Refer to
Sequentially selects the input signal RGB, Component Video, S-Video, Video or DVI-
I.
5. Auto (Refer to
Automatically determines the best picture timings for the selected input.
When a wireless module is installed, the Wireless Connection menu is displayed and
the IEEE 802.11 a is selected, press this button to search for a reliable channel. (The
wireless module is available through BenQ retailers.)
6. Lamp indicator light (Refer to
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a
problem.
7. Temperature warning light (Refer to
Flashes red if the projector's temperature becomes too high.
8 Introduction
"Start up" on page 25
"Hiding the image" on page 32
for more information.)
"Selecting a picture mode" on page 31
"Switching input signal" on page 28
"Auto-adjusting the image" on page 29
13
14
8
1
9
2
3
and "Shutting down the projector" on page
and
"Indicators" on page 51
"Indicators" on page 51
6
12
7
5
10
4
11
"Utilizing FAQ function" on
for more information.)
for more information.)
for more information.)
for more information.)
for more information.)