Connection; Wireless Connection (Optional); Cable Connection - BenQ MP721 - XGA DLP Projector User Manual

Connection

When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the
projector (see
from electronics stores.

Wireless connection (optional)

The Wireless module allows for simultaneous wireless connectivity to multiple computers
which are wireless enabled. This saves you from having to swap data cables between the
projector and different computers during a presentation. Wireless connectivity is most
suitable for situations where multiple presenters with separate notebooks are required to
seamlessly present individual presentations, like in meetings, conferences, lectures and,
classrooms.
Even though the Wireless module is not attached to the projector, everytime the projector is
turned on, the status of wireless connection will display on the screen while the projector is
searching for input signals during the start up procedure.
The Wireless module connects and attaches to the rear of the projector through the DVI-I
socket.
While the Wireless module is attached to the projector, you cannot use the DVI-I socket for DVI
cable connections.
Even though the projector may be using a wireless data connection, it still requires physical
connection to a power outlet using its power cable.
You can purchase a BenQ wireless
module from BenQ retailers. You
should attach the wireless module
to the projector before you connect
any other cables. Refer to the user
manual enclosed with the wireless
module for connection and
operation details.

Cable connection

Connecting a computer or monitor
Connecting a computer
The projector provides a VGA and DVI input sockets that allow you to connect it to a laptop
or desktop computer.
"Shipping contents" on page 6). They are commercially available
Projector with the wireless module
Connection 17