Picture Menu - BenQ MP721 - XGA DLP Projector User Manual

Picture menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting
/ value)
Picture Mode
(PC:
Dynamic;
YPbPr/ S-
Video/ Video:
Standard)
Color Temp
(depends on
the selected
Application
mode)
Brightness
(depends on
the selected
input source)
Contrast
(depends on
the selected
input source)
DESCRIPTION
Pre-defined application modes are provided so you can optimize your
projector image set-up to suit your program type.
You can use the remote control 'Mode' button to select a predefined
application mode. See
details.
There are four color temperature* settings available.
1. T1: With the highest color temperature, T1 makes the image appear
the most bluish white than other settings.
2. T2: Makes images appear bluish white.
3. T3: Maintains normal colorings for white.
4. T4: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be "white" for
various purposes. One of the common methods of representing white
color is known as the "color temperature". A white color with a low color
temperature appears to be reddish white. A white color with a high color
temperature appears to have more blue in it.
Adjusts the brightness of the image. The higher the value, the brighter the
image. And lower the setting, darker the image. Adjust this control so the
black areas of the image appear just as black and that detail in the dark
areas is visible.
Adjusts the degree of difference between dark and light in the image. The
higher the value, the greater the contrast. Use this to set the peak white
level after you have previously adjusted the Brightness setting to suit your
selected input and viewing environment.
"Selecting a picture mode" on page 31
-30 50
-30
50
for
+70
+70
Operation 39