HP FB040AA Product Manual page 44

Setting
Use separate settings
Outgoing server settings
User name
Password
Domain
Require SSL for outgoing mail
TIP: You can set up several e-mail accounts in addition to your Outlook e-mail account but you cannot
add a new account while connected. Tap Menu > Stop Send/Receive to disconnect.
Change e-mail download options
You can customize the following download options for each e-mail account that you have with an ISP,
or any account that you access using a VPN server connection (typically a work account).
You can choose:
●
Whether messages are downloaded automatically.
●
How much e-mail is downloaded.
●
If and how attachments are downloaded (IMAP4 only).
To change the e-mail download options, do the following:
1. In the message list, tap Menu > Options.
2. Select the e-mail account.
3. Tap Next until you reach Server information.
4. Tap Next until you reach the Message download Limit list, and then select Entire Message
Receive attachments check box.
TIP: To send and receive messages automatically, tap Connect, check for messages, and enter a
time interval. Connecting automatically might result in higher connection charges.
To save memory, limit the number of e-mails downloaded to your device by lowering the number of days
to display.
To change options for an Outlook e-mail account, tap Start > ActiveSync > Menu > Options.
36 Chapter 8 Messaging
Description
Select this if your outgoing e-mail server requires a different
user name and password than the ones you entered before.
Configure these settings to ensure that your outgoing e-mail
messages are delivered.
Enter your user name for the outgoing e-mail server.
Enter your password for the outgoing e-mail server.
Enter the domain of the outgoing e-mail server.
Select this to ensure you always send e-mail from this account
using an SSL connection. This enables you to send personal
information more securely. Note that if you select this and your
ISP does not support an SSL connection, you might not be able
to send e-mail.