Table of Contents
Advertisement
Enter owner information
Enter your personal information, such as your name and address, so that the HP iPAQ can be returned
to you if it is lost.
1.
Tap Start > Settings > Personal > Owner Information.
2.
On the Identification tab, enter your personal information.
TIP:
You can edit the owner information directly from the Today screen. To do so, select the Owner
Info check box while customizing the Today screen. For more information, see
on page
11.
Perform a soft reset
A soft reset stops all running applications, but does not erase any programs or saved data.
NOTE:
Be sure to close all running applications before performing a soft reset.
To perform a soft reset:
1.
Locate the recessed Reset button on the HP iPAQ.
2.
Use the stylus to lightly press the Reset button.
Perform a hard reset
A hard reset stops all running applications and erases any program which you have installed, as well
as saved data.
To perform a hard reset:
1.
Press the Application Key 3, Application Key 2, and the Voice Recorder button simultaneously
and hit the Reset button once.
2.
Press and hold the Application Key 3, Application Key 2, and the Voice Recorder button until
Clean boot is displayed at the bottom of the screen.
View the Operating System (OS) information
Tap Start > Settings > System > About.
The Version tab displays important device information, including the type of processor and the amount
of available memory.
Change the HP iPAQ name
The device name is used to identify your HP iPAQ in the following situations:
●
Synchronizing with a computer
●
Connecting to a network
NOTE:
If you synchronize multiple devices with the same computer, each device must have a unique
name.
14
Chapter 5 Learn the basics
The Today screen
Hide quick links:
Advertisement
Table of Contents
