3. Move the printer back toward the stand.
4. Connect the printer power cord to the power strip.
5. Use the thumbscrews to attach the printer to the
bumper brackets on either side of the stand.
ES3640e MFP 53.jpg
ES3640e MFP
52.jpg
ES3640e MFP 58a.jpg
6. Connect the DCD cable lines to the printer.
ES3640e MFP 59a.jpg
7. Secure the lower end of the DCD cable to the left
side of the stand (above the power strip) using
one of the cable clips and one of the medium
screws.
ES364
0e MFP
106a.j
pg
20
ES3640e MFP
55.jpg