Oki CX3641MFP Technical Reference page 19

S U P
ETTING P RINTING
7 Type the CX3641MFP IP address.
8 Click Next.
9 Make sure that Generic Network Card is selected as Standard for Device Type and click Next.
10 Click Finish to close the Add Standard TCP/IP Printer Port Wizard dialog box, and then click
Close in the Printer Ports dialog box.
To change the default setting, proceed to
11 Click Configure Port on the Ports tab of the Properties dialog box.
The Configure Standard TCP/IP Port Monitor dialog box appears.
12 To use LPR printing, select LPR in the Protocol area and LPR Byte Counting Enabled in the
LPR Settings area.
N : You can also proceed without selecting LPR Byte Counting Enabled.
OTE
C
ONNECTIONS
step 11.
19