Font Substitution; Disable Device Fonts; Graphics - Kyocera KM-1820 User Manual

Imaging

Graphics

5-4

Font Substitution

With Substitute with device fonts selected as the font setting, click Fonts to open
the Font Substitution dialog box.
The System fonts list shows the fonts installed on your computer. The printing
system fonts are listed in the Available device fonts list. Select the system font, and
then the available device font to be substituted. If the device font does not have
similar font characteristics to the system font, character spacing in the document
appears incorrect.

Disable Device Fonts

In some cases, the printing system substitutes fonts even if you send the TrueType
fonts as outline fonts or bitmap images. Select Disable device fonts to prevent
substitution of device fonts for TrueType fonts.
When printing with Autodesk or Adobe applications, select Disable device fonts to
overcome device font limitations with these applications. Device fonts are normally
visible in application font lists as printer icons next to the font name, unless there are
equivalent system fonts, in which case the "TT" TrueType icon remains.
This option also improves portability of printable data. (If cleared, device fonts may
not match when sent to a different printing system.)
The Substitute with device fonts option is disabled if Disable device fonts is
selected.
From the Imaging tab, click Graphics to open the Graphics Settings dialog box.
Choose your graphics settings, and then click OK to save your selections. See below
for descriptions of graphics settings options.
Note: Some options are available only when a specific PDL is selected. For further
details on changing the page description language, refer to PDL Settings on
page 2-8.
KX Driver