Limited Warranty, Us And Canada; On-Site Repair - Oki CX2032MFP Safety And Warranty Manual

If using an extension cable or power strip ensure that the total
current rating (amperes) of all connected equipment is less than the
maximum rating of the extension cable, power strip or wall outlet. If
the product is already supplied with a fitted power strip then no
additional power strip or extension cable should be used to connect
to the mains wall outlet. Otherwise, fire or shock may occur.
Ensure the power cable is routed so as not to be damaged or cause a
trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not intended
for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
If you do not connect the power cord or any other cables only as
directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to opening
covers; otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or print
head as you may receive burns. Allow it to cool before touching.
If the product casing gets extremely hot or smoke, unusual smells or
abnormal noises are emitted from the product, there is a risk of fire.
Unplug the mains connector and contact your dealer.
If the product has been knocked over or damaged, there is a risk of
electric shock, fire and/or injury. Unplug the mains connector and
contact your dealer.
If any liquid (for example water) is allowed to enter the product,
there is a risk of fire. Unplug the mains connector and contact your
dealer.
Do not place containers containing liquid on the product as electric
shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the
product, there is a risk of electric shock, fire and/or injury. Unplug
the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or operate
this product with any covers open or doors removed as electric shock,
fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the
product contains high temperature parts that may cause a fire.
Switch the product off before cleaning to prevent any risk of injury.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when the
product is in operation to prevent possible risk of injury.
Do not carry out any operations on the product that are not specified
in the User's Guide. This may result in electric shock, fire and/or
injury.
Do not touch the battery if one is fitted to the product. There is a risk
of explosion if the battery is replaced by an incorrect type. The
product battery should not require replacement during the life of the
product.
Do not throw toner cartridges or image drum cartridges into a fire as
you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other
internally fitted option, any covers removed or doors opened must
be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as measured
in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C and 20
to 80% RH. Operation of the product outside this range could result
in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these
items so as to avoid risk of entrapment or personal injury.
If the product is installed on a cabinet or high capacity feeder, ensure
wheel locks are applied once placed in final position for use, to
prevent risk of movement or injury.
English

Limited Warranty, US and Canada

U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this CX2032 MFP
(hereinafter "the Product") to be free from defects in material
and workmanship and will remedy any such defect according to
the terms of this Limited Warranty.
Oki Data will repair (or at its option, replace) at no charge, any
defective component(s) of the Product for 90 days from the date
of purchase except for the printheads (LED imaging arrays), which
are warranted for a period of five (5) years from date of purchase.
This Limited Warranty extends to the original purchaser only. This
Limited Warranty does not extend to consumable items.

On-Site Repair

Note: On-Site Repair is available in the United States and
Canada only. On-Site Repair does not include the
replacement or repair of product consumables or
supplies.
Oki Data will, for a period of 90 days from the date of
original purchase, repair or replace (at Oki Data's option)
on-site at the original purchaser's facility and without
charge, any defective component(s) of the product,
provided that the warranty service is performed by an Oki
Data authorized service provider. The printheads (LED
imaging arrays) have a 5-year parts only warranty from
date of original purchase. Following the first year of
warranty coverage, the printheads will be replaced by an
authorized Oki Data service provider at Oki Data's then
current labor rates.
Oki Data reserves the right to use new and/or refurbished
parts in the warranty repair process. If the product or a
component of the product is being replaced, the
replacement product or component will be warranted for
thirty (30) days or the remaining warranty period of the
replaced product, whichever is longer.
As a condition of this Limited Warranty, requests for
On-Site Repair must include the name and phone number
of a fully competent and responsible adult with the
authority to consent to the entry of the servicing
technician to the premises where the product is located,
and who will remain with the servicing technician while
the service work is performed. Any and all dangerous
conditions must be removed from the site prior to and
throughout the time a service technician is present. The
service technician may refrain from entering the premises
or continuing to provide services at any site, if in the
servicing technician's reasonable judgement the site
poses a risk of physical harm or danger. If warranty
services cannot be performed or completed due to any of
the foregoing reasons the On-Site service option is null
and void and the product must be returned to an
authorized Oki Data service location for warranty repair
service.
To make request or claim for service under this Limited
Warranty contact your local Oki Data authorized service center
or Oki Data at 1-800-OKI-DATA (1-800-654-3282).
A written receipt for the product, showing the date of purchase,
dealer's name, and both the model and serial numbers of this
3 - English