Table of Contents
Advertisement
P4TDH BIOS Setup
UART Mode Select
This item allows you to determine which Infra Red (IR) function of onboard I/O chip.
The Choices: Normal (default), ASKIR, IrDA.
UR2 Duplex Mode
Select the value required by the IR device connected to the IR port. Full-duplex mode
permits simultaneous two-direction transmission. Half-duplex mode permits transmission
in one direction only at a time.
The Choices: Halt (default), Full.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which I/O
address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
The default value is SPP.
SPP (default)
EPP
ECP
ECP+EPP
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
Game Port Address
Game Port I/O Address.
The Choices: 201 (default), 209, Disabled.
Midi Port Address
Midi Port Base I/O Address.
The Choices: 330 (default), 300, 290, Disabled.
Midi Port IRQ
This determines the IRQ in which the Midi Port can use.
The Choices: 10 (default), 5.
Using Parallel port as Standard Printer Port.
Using Parallel port as Enhanced Parallel
Port.
Using Parallel port as Extended Capabilities
Port
Using Parallel port as ECP & EPP mode.
17
Advertisement
Table of Contents
