Chapter 1: Introduction; Before You Start; Package Checklist - Biostar P4M890-M7 TE Setup Manual

CHAPTER 1: INTRODUCTION

1.1 B Y
EFORE
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with

sufficient lighting.
Always disconnect the computer from power outlet

before operation.
Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat

source, humid air and water.
1.2 P
ACKAGE
HDD Cable X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
Rear I/O Panel for ATX Case X 1
FDD Cable X 1 (optional)
Serial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may differ by area or your motherboard version.
P4M900-M7 SE/P4M890-M7 TE
S
OU TART
C
HECKLIST
3