Multi-Zone Operation - Dual XDVD8285 Installation & Owner's Manual

XDVD8285
Multi-Zone - AM/FM Tuner Operation
87
OPERATION
15
14
13
1
11
10
9 8
Clock indicator - displays current time.
1
Multi-zone mode indicator - displays current multi-zone source.
2
Preset page up/down arrows - press to select the next or previous preset page.
3
Preset number list display - shows the preset station list by frequency. Touch
4
frequency to select a preset. Touch and hold frequency to store presets.
Tuner scan - touch to scan through all available stations in the current band,
5
pausing for 10 seconds on each station. Touch again to cancel. SCAN will change
to yellow when the scan function is active.
Tune frequency up - touching this icon will tune the radio to a higher frequency by
6
one frequency step.
Tune frequency down - touching this icon will tune the radio to a lower frequency
7
by one frequency step.
Preset scan/auto station store - touching this icon will scan through all presets in
8
the current band. Holding this button for more than  seconds will automatically
program the 1 strongest stations available into the presets in the current band.
AS will change to yellow during the auto station store process.
Band - Touch band icon repeatedly until the desired band is displayed FM1,
9
FM, FM3, or AM.
Local/DX tuning mode - press to select between local or distance tuning.
10
Stereo indicator - shows that the frequency selected is received in stereo. ST will
11
change to red during stereo reception.
Current station indicator - indicates current frequency.
12
Band indicator - shows current band FM1, FM, FM3, or AM.
13
Preset indicator - shows what preset has been selected.
14
Main zone mode indicator - displays current main zone source.
15
6
7
5
1

3
4