Dual XDVD8285 Installation & Owner's Manual page 86

XDVD8285
General Operation - Multi-Zone Menu
Multi-Zone Menu Access
Touch Access Buttons
Rapid Dial
85
OPERATION
There are two methods to access the Multi-Zone menu
• Press the MENU button on the front panel, then press Multi-Zone
• Touch the upper left corner of the touch screen, then press Multi-Zone
13
1
11
10
9
8
Touch to set CD/DVD mode as the Multi-Zone mode, (CD/DVD must be inserted)
1
Touch to set CAMERA mode as the Multi-Zone mode, if optional camera isn't
2
connected then "No Video Signal" will be displayed.
Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first). Refer
3
to page 1 for more details.
Touch to RETURN to previous screen
4
Touch to set the Multi-Zone mode in STANDBY (Off).
5
Notes: When the Multi-Zone mode is set to STANDBY (Off), the video signal from
the 6.5" TFT is shown by default and the Multi-Zone audio is disabled.
Press and hold the MODE button on the front panel for more than 
seconds to change the Multi-Zone mode from STANDBY (Off) to active.
Touch to set AUXILIARY A/V INPUT mode as the Multi-Zone mode.
6
Touch to set SD mode as the Multi-Zone mode, (SD card must be inserted)
7
Touch to access SCREEN SETUP menu
8
Touch to access GENERAL SETUP menu
9
Touch to access ASP Config menu
10
Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function)
11
Touch to access MULTI-ZONE source menu
12
Touch to access MAIN source menu
13
RAPID DIAL can also control touch screen functions from the multi-zone menu
• Select desired function rotating clockwise or counter-clockwise
• Function will be outlined in yellow
• Press to confirm/ENTER
1 
6
7
3 4
5