General Operation - Dual XDVD8285 Installation & Owner's Manual

XDVD8285

General Operation

Power On/Off
Optional Mode Selection
Audio Adjustment
(from front panel)
Audio Adjustment
(from remote)
17
OPERATION
Press to turn the unit on. Hold for 3 seconds to turn the unit off.
Mute
Press MUTE to silence the audio;
Display). Press MUTE again to cancel.
Mode
Press MODE to select between Tuner, Disc, iPod, XM, Camera, SD and Aux
AV inputs. Modes of operation are indicated in the OSD (On Screen Display).
XM tuner, iPod and SD card (all optional) must be connected/inserted to
appear in the MODE selection string.
Press the top left corner of the screen to display the OSD menu bar. Press
Tuner, Disc, iPod, XM, Camera, SD and Aux AV inputs in the MAIN menu
page to select the desired source.
Volume
Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).
Press rotary knob for 3 seconds, then release. Press rotary momentarily to
advance to desired parameter to be changed.
Turn rotary Q or P to adjust to desired level. Press rotary to advance to next
selection, and press and hold to exit.
-Channel Audio Settings
00
00
00
00
00
Press the SEL button. Press the p or q buttons on the remote to select an
item to be adjusted. Press  or  to adjust the desired setting. Press the
ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set to
"User" mode. The Loud function compensates for deficiencies in sound
ranges at low levels. When the Loud function is on, LOUD is displayed in the
OSD.
00 will appear in the OSD (On Screen
F
R
L R
L
6-Channel Audio Settings
A djustable Range
ltem
Master Volume
Front Left Channel Volume -10 to +10
Front Right Channel Volume
-10 to +10
Rear Left Channel Volume -10 to +10
Rear Right Channel Volume
-10 to +10
Center Channel Volume -10 to +10
Subwoofer Volume -10 to +10
Note: 6-Channel audio is only
adjustable when "Full 6CH" mode
is selected. Refer to page 49 for
more details.
00 to 40