Table of Contents
Advertisement
3-4
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
ACPI Suspend Type
Soft-Off by PWR-BTTN
AC Back Function
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
S3 (STR)
Set the suspend type to RAM under ACPI OS. (Default setting)
S1 (POS)
Set the suspend type to Power ON Suspend under ACPI OS.
Soft-Off by PWR-BTTN
Instant-Off
Press power button then Power off instantly. (Default setting)
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed
less than 4 sec.
AC BACK Function
Soft-Off
When AC-power back to the system, the system will be in "Off" state.
(Default setting)
Full-On
When AC-power back to the system, the system always in "On" state.
Memory
When AC-power back to the system, the system will return to the Last state
before AC-power off.
Resume by Alarm
You can set "Resume by Alarm" item to Enabled and key in Date/Time to power on system.
Disabled
Disable this function. (Default value)
Enabled
Enable alarm function to POWER ON system.
If Resume by Alarm is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
Power Management Setup
[S3(STR)]
[Instant-Off]
[Memory]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Everyday, 1~31
34
BIOS Setup
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
