Table of Contents
Advertisement
GA-6JIEV2-RH Motherboard
Disabled
Disable USB 2.0 controller.
Legacy USB storage detect
This option allows users to decide whether to detect USB storage devices, including USB flash
drives and USB hard drives during POST.
Enabled
BIOS will scan all USB storage devices. (Default setting)
Disabled
Disable this function.
Onboard Lan Controller
All of Enabled
Only Used LAN1
Only Used LAN2
All of Disabled
Onboard Lan Boot ROM
Enabled
Onboard Lan Boot ROM.
Disabled
Disable this function. (Default setting)
Onboard Parallel Port
This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
Disable onboard LPT port.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default setting)
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
This feature allows you to connect with an advanced printer via the port mode it supports.
SPP
Using Parallel port as Standard Parallel Port. (Default setting)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP Mode Use DMA
This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected.
This function will available when "Parallel Port Mode" set at ECP or ECP+EPP.
3
Set ECP Mode Use DMA to 3. (Default setting)
1
Set ECP Mode Use DMA to 1.
Onboard Serial Port 1
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default setting)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled
Disable onboard Serial port 1.
Onboard Serial Port 2
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4.
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8/IRQ3. (Default setting)
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled
Disable onboard Serial port 1.
Enable all onboard LAN devices. (Default setting)
Enable onboard LAN1 device.
Enable onboard LAN2 device.
Disable both onboard LAN devices.
3 3
Advertisement
Table of Contents
