Table of Contents
Advertisement
GA-6JIEV2-RH Motherboard
Access Mode
Capacity
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option
based on this information.
Cylinder
Head
Precomp
Landing Zone
Sector
Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory installed in the
system.
The value of the base memory is typically 512 K for systems with 512 K memory installed on the
motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU's memory address map.
Total Memory
The BIOS determines the total memory is present during the POST.
BIOS Version
The BIOS determines the current BIOS version.
Use this to set the access mode for the hard drive. The two options are:
Large/Auto(default:Auto)
Capacity of currently installed hard drive.
Number of cylinders
Number of heads
Write precomp
Landing zone
Number of sectors
2 9
Advertisement
Table of Contents
