Table of Contents
Advertisement
Setting Up Screen Call
This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or
one that you have recorded. You can also record the caller's
message into the Voice Data list.
Note:
Recorded caller's messages become ".uvo" file format data
and can be played only when accessed in the Voice Data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, select Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On.
3.
Set the answer delay by using numeric keys or by
pressing the navigation key up or down.
4.
Select OK (left softkey). (The
Tip:
While the caller's message is being recorded, press
answer the call, or press
the call.
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1.
Select
Announcement.
2.
Depending on your preference, select Pre-Recorded or
Custom.
Section 2H: Using Your Phone's Voice Services
>Tools > Voice Memo > Screen Call > Auto.
>Tools > Voice Memo > Screen Call >
icon is displayed.)
to stop recording and disconnect
to
143
Advertisement
Table of Contents
