Bluetooth Connection Settings; Send Data Using Bluetooth Technology - Nokia 5500 Sport - Smartphone 64 MB User Manual

Bluetooth connection settings

Select Menu > Connect. > Bluetooth.
When you activate Bluetooth technology for the first time, you are asked to give a
name to your phone.
Bluetooth — to switch Bluetooth On/Off
My phone's visibility > Shown to all — to allow your phone to be found by other
Bluetooth devices. For security reasons it is advisable to use the Hidden setting
whenever possible.
My phone's name — to define a name for your phone.
Remote SIM mode > On — to enable the usage of the SIM card of the phone by
another device (for example a car kit) by Bluetooth technology (SIM Access Profile
SAP)
When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers programmed into your device, while in
this mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the code to unlock it first.

Send data using Bluetooth technology

There can be only one active Bluetooth connection at a time.
1. Open an application where the item you wish to send is stored. For example, to
send a photo to another device, open the gallery application.
2. Scroll to the item you want to send, and select Options > Send > Via
Bluetooth.
3. The phone starts to search for devices within range. Paired devices are shown
with .
To interrupt the search, select Stop. The device list freezes, and you can start to
form a connection to one of the devices already found.
When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code
*#2820# in the standby mode.
If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select More devices. If you
switch off the phone, the list of devices is cleared and the device search needs
to be started again before sending data.
73