Nokia 5500 Sport - Smartphone 64 MB User Manual page 60

Calls on both lines can be answered irrespective of the selected line. You cannot
make calls if you select Line 2 and have not subscribed to this network service. To
prevent line selection, select Line change > Disable if supported by your SIM card.
To change this setting, you need the PIN2 code.
Connection
Your phone supports packet data connections , such as GPRS in the GSM
network. See "Indicators," p. 17. To establish a data connection, an access point is
required. You can define different kinds of access points:
• MMS access point to send and receive multimedia messages
• Access point for the Web application to view WML or XHTML pages
• Internet access point (IAP) (for example, to send and receive e-mail)
Check which kind of access point you need with your service provider for the
service you wish to access. For availability and subscription to packet data
connection services, contact your network operator or service provider.
Receive access point settings
You may receive access point settings in a message from your service provider, or
you may have preset access point settings in your phone.
Access points
To create a new access point or edit an existing access point, select Menu >
Tools > Settings > Connection > Access points > Options > New access point or
Edit. If you create a new access point, use the settings of an existing access point
as a basis by selecting Use existing settings, or start with default settings by
selecting Use default settings.
Follow the instructions from your network operator or service provider.
Connection name — to give a descriptive name for the connection
Data bearer — The options are Packet data, Data call, and High speed (GSM).
Depending on what data connection you select, only certain setting fields are
available. Fill in all fields marked with Must be defined or with an asterisk. Other
fields can be left empty, unless you have been instructed otherwise by your service
provider.
Access point name (for packet data only) — The access point name is needed to
establish a connection to the GPRS network.
60