Protect My Hp Ipaq From Screen Damage Or Cracking - HP Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB Manual

How Do I Protect My HP iPAQ from Screen Damage
or Cracking?
CAUTION: The screen and camera lens of your HP iPAQ is made of glass
and can be damaged or broken by drops, impacts, or pressure.
NOTE: HP is not responsible for damage that occurs as a result of your
failure to follow the instructions that came with the HP branded product.
Refer to the warranty document included with your HP iPAQ for
more information.
You should observe the following practices to protect the screen and
camera lens of your HP iPAQ from damage.
• When transporting your HP iPAQ in a purse, pocket, briefcase, etc.,
ensure the device does not get compressed, bent, dropped, hit, or
sat on.
• When not in use, close the flip cover on your HP iPAQ and store it
in a case. You can select from a wide variety of case options at
www.hp.com/go/ipaqaccessories.
• Do not place anything on top of your HP iPAQ.
• Do not bang your HP iPAQ against hard objects.
• Never use any device other than the stylus that comes with the
HP iPAQ or an approved replacement to tap or write on the screen.
If you lose or break your stylus, you can order extras at
www.hp.com/go/ipaqaccessories.
• Clean your HP iPAQ by wiping the screen, the camera lens, and the
exterior with a soft, damp cloth lightly moistened only with water.
CAUTION: To reduce the risk of damage to the internal components, do
not spray liquid directly on the screen or allow excess liquid to drip inside
your HP iPAQ. Using soap or other cleaning products on the screen may
discolor the finish and damage it.
45