Tour Of The Product; Hp Elite X3 Hardware Specifications - HP Elite x3 Manual

Tour of the product

HP Elite x3 hardware specifications

The HP Elite x3 supports the following features.
Feature Specification
Industrial design Phablet with a plastic cover in one of the following colors:
The phone is designed for MIL-STD 810G and IP67 compliance.
Processor Qualcomm Snapdragon 820 (2.15 GHz) quad-core processor
Chipset Qualcomm MSM 8996
Graphics Integrated Adreno 530 graphics controller
Memory
4 GB LPDDR4 on-board, dual-channel system memory
Storage
Up to 64 GB eMMC 5.1 (24 GB reserved for system recovery software)
Display panel Features a 15.14 cm (5.96 inch) display with the following specifications:
Expansion
Supports microSD card up to 2 TB
Ports and slots
Wireless
© 2016 HP Development Company, L.P. HP Confidential – For training purposes only
 HP Graphite and Chrome
 Rose Gold
 Wide QHD (2560 x 1440) resolution – 494 PPI
 Active Matrix OLED (AMOLED) (https://en.wikipedia.org/wiki/AMOLED)
 10-point multi-touch with passive stylus support
 Gorilla Glass with an anti-reflective coating.
 85 degree viewing angle
 Typical brightness of 350 nits, and up to 550 nits in High Brightness
Mode
 USB-C 3.0 port—Supports DisplayPort video output
 3-in-2 card tray that supports two nanoSIM cards, or a nanoSIM card and
a microSD card (some regions support a single nanoSIM only)
 Headphone/microphone combo port (3.5 mm)
 Pogo-pin connectors to connect to peripheral device
Note: The pogo-pin connectors are for future expansion, to attach
accessories like a barcode scanner or battery booster to the phablet.
 WLAN—Dual band 802.11 a/b/g/n/ac 2x2 antenna diversity support with
Bluetooth 4.0 and support for Miracast/Wi-Fi Direct mirroring
 WWAN—2G/3G/4G, LTE-A with carrier aggregation, up to CAT 6

NFC—NXP (NQ210)
7