Download Print this page

Determining Wall Plate Location - Maytag MMV4205BAQ - 2.0 cu. Ft. Microwave Installation Instructions Manual

Installation instructions
Hide thumbs

Advertisement

Installation
Instructions
C. DETERMINING
WALL PLATE LOCATION UNDER YOUR CABINET
Plate position
- beneath
flat bottom
cabinet
Draw a vertical
line on
the wall at the center of
the 30" wide space.
Tape the Rear Wall
Template
onto the wall
matching
the centeriine
and touching
the
bottom of the cabinet.
_mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm|
Plate position
- beneath
framed
recessed
cabinet
bottom
33" to Cooktop
Draw a vertical line on the wall at the center of the
30" space.
Tape the Rear Wall Template
onto the wall
matching
the centeriine
and touching
the bottom
cabinet frame.
Plate position
- beneath
recessed
bottom
cabinet
with front
overhang
'k
Your cabinets
may have decorative
trim that
interferes
with the microwave
installation.
Remove
the decorative
trim to install the microwave
properly
and to make it level.
THE MICROWAVE
MUST
BE LEVEL.
Use a level to make sure the cabinet
bottom is level.
If the cabinets
have a front overhang
only, with no
back or side frame,
install the mounting
plate down
the same distance
as the front overhang
depth. This
will keep the microwave
level.
1. Measure
the inside depth of the front overhang.
2. Draw a horizontal
line on the back wall an equal
distance
below the cabinet bottom
as the inside
depth of the front overhang.
3. For this type of installation
with front overhang
only, align the mounting
tabs with this horizontal
line, not touching
the cabinet bottom as described
in Step D.

Hide quick links:

Advertisement

loading

  Also See for Maytag MMV4205BAQ - 2.0 cu. Ft. Microwave

  Related Manuals for Maytag MMV4205BAQ - 2.0 cu. Ft. Microwave

This manual is also suitable for:

Mmv4205Amv5206Mmv5207Jmv8208Amv6167Jmv8166 ... Show all