On-Screen Options And Settings - Maytag MHW9000YG Use And Care Manual

ON-SCREEN OPTIONS AND SETTINGS

Many of the settings and options for each cycle are included in
the on-screen display, and can be selected or adjusted once you
have selected the wash cycle with the cycle knob.
NOTE: Not all options or settings are available with all cycles,
and some may not be used together.
To adjust settings, use the selection button beneath the desired
option. If the screen shows the multiple page symbol
press the or button to display additional options.
Then press the or button until the desired setting for that
option is in the center of the display and press the center
selection button to select.
TEMPERATURE
The recommended wash temperature is preset for each cycle.
You may also select a wash temperature based on the type of
fabric and soils being washed. For best results, use the warmest
wash water safe for your fabric, following the garment label
instructions. All wash temperatures feature a cold rinse, except
Warm/Warm, which has a warm wash and a warm rinse.
SOIL LEVEL
Soil level is preset for each wash cycle. For most loads, use the
soil level that is preset with the cycle you have chosen.
Press the or button to adjust the Soil Level to the desired
setting. Different Soil Level settings may increase or decrease the
cycle time shown in the Estimated Time Remaining display.
6
SPIN SPEED
This washer automatically selects the spin speed based on the
cycle selected. Preset speeds can be changed.
Faster spin speeds mean shorter dry times, but may increase
n
wrinkling in your load.
Slower spin speeds reduce wrinkling, but will leave
n
your load more damp.
DELAY START
Delay the start of the wash cycle up to 16 hours.
PRETREAT
Prewash
Use Prewash with loads of heavily soiled items. Prewash will
,
add additional time to the main cycle.
Autosoak
Autosoak is helpful in removing small spots of set-in stains
from fabrics. It tumbles the load briefly for even distribution,
then provides an extended cold or warm water soak with
minimal drum movement to help loosen tough stains.
RINSE
Normal
Standard rinse is default on most cycles. See the "Cycle
Guide" for available Wash/Rinse temperature options.
Extra
Provides an extra rinse to thoroughly flush out bleach or
allergens. Extra rinse is default on the Whites cycle and
some Specialty Cycles. It can be added to most other
cycles by selecting the Extra option.
Ultra
Ultra provides two additional rinses to a cycle. Ultra may
be selected for all cycles located around the dial with the
exception of Drain & Spin and Clean Washer. It may also be
added to the Stuffed Animals and Pillows Specialty Cycles.
MAX EXTRACT
Max Extract
™
remove additional water during the spin. This helps
reduce drying times.
™
uses an extended high-speed spin to