Modifiers; Drying Rack Option - Maytag MED6600TQ - 27 Inch Electric Washer Use & Care Manual

Steam Refresh Preset Cycle Settings
Timed Cycles Default Temperature _ Default Time
Load Type (Minutes) _
RAPID REFRESH Small Load Medium 15
Helps to smooth out wrinkles and
reduce odors from loads consisting of
one to four dry items.
CUSTOM REFRESH Medium 20
Helps to smooth out wrinkles in loads
left in the dryer for an extended
period.
*]emperature and Timed Cycle Adjust are selectable only for the Custom Refresh Cycle.
NOTE: The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum
dry time of 40 minutes. Only the Medium and High temperature settings can be used for
the Custom Refresh cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the cycle by pressing the Timed
Cycle Adjust up or down arrows. See "Changing Cycles, Modifiers and Options."
NOTE: Timed Cycles may also be used with the dryer rack. See "Drying Rack Option."
Timed
Dry
Use this cycle to complete drying if items are still damp after a Sensor Dry Cycle. Timed Dry
is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes.
[ightweight garments, such as exercise wear, can be dried using Timed [Dry on a low
temperature setting. Timed [Dry can also be used with the Drying Rack.
Timed Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature (Minutes)
TIMED DRY High 40
Heavyweight, bulky items, work
clothes
Sensor Dry Cycle Modifiers
Use the DRYNESS button to select dryness levels for the Sensor [Dry Cycles. Press DRYNESS
until the desired [Dryness setting illuminates.
[he preset dryness setting is Normal when a Sensor [Dry Cycle is selected. You can select a
different dryness level, depending on your load, by pressing Dryness and choosing More,
Normal, I.ess or Damp. Selecting More, Normal, I.ess or [Damp automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed
without stopping the cycle.
• MOr_
• NOrMaL
NOTE: Dryness [.evel selections cannot be used with the Timed or Steam Cycles.
Timed Cycle Modifiers
Use the TEMPERATURE button to select temperatures for the Timed Cycles. Press TEMP until
fine desired temperature setting illuminates.
• M'_DIUM
• _ow
• _XTRA LOW
FLUFF
TEMP
CC S
NOTE: [_mperature modifiers cannot be used with the Sensor Dry Cycles.