Table of Contents
Advertisement
11.
Secure the liner to the 4" connector on the top of the ULTRA FLAME with three
metal screws.
12.
Push the ULTRA FLAME back in the fireplace while pulling the draft hood in
place. To do so, fix two ropes to the draft hood sliders. Make sure the draft hood
front lip is squeezed under the steel angle to prevent any motion. The probe tube
must go through the top of the appliance tube accessible by opening the top front
grill. When the hood is in its location, fix it with 2 screws in the prepunched
holes.
7
- Quick Links:
- Replacement Parts
Hide quick links:
Advertisement
Table of Contents
