Kenmore 9875 - 24 in. Laundry Center Owner's Manual And Installation Instructions page 27

CONNECT LAUNDRY CENTER
TO GAS; LINE
STEP 1. Remove the red cap from
the gas pipe. Move the laundry, center
to its final position.
STEP 2. Connect gas supply to laundry
center. Use a wrench to tighten. For
gas connections you must use, pipe joint
compound resistant to the action of
L.P. gas. Apply pipe joint compound
to the non-flared male threads only.
There should be a natural loop in the
flexible £1asconnector. The flexible gas
connector must not be twisted, kinked
or attach=ed with any sharp bends.
STEP 3. Open the shut-off valve in the
supply line. The valve is open when the
handle is parallel to the gas pipe.
STEP 4. Test all the connections by
brushing on a soapy water solution
(liquid detergent also works well).
Bubbles will show a leak. Correct
any leak found. Never test for gas
leaks with a flame.
CORRECT
tl.
WRONG
WRONG
27