Advertisement
G. SECURE
CABLE
BRACKET
STEP 1. Cut the plastic strap securing
the cable wire bracket to the power
supply cord. Do not cut cable. Remove
the power supply cord from the bracket.
Discard plastic strap.
H. SECURE
DRAIN
HOSE
Securing the drain hose properly will
protect your floors from damage due
to water leakage.
STEP 1. Move laundry center to its
final location.
STEP 2. Use the plastic strap from
the parts bag to wrap the drain hose
together with the laundry tub or stand-
pipe. Secure plastic strap.
24
STEP 2. Mark the hole locations on the
wall where the bracket will be installed.
Prepare mounting holes suitable for your
wall construction.
STEP 3. Attach the cable wire bracket
to a board and mount on the wall. Check
that bracket is secure. For some instal-
I,ations it may be easier to make the gas
and exhaust vent connections
before
attaching cable bracket to wall.
!
NOTE: Screws to attach the cable bracket
have not been providecl because of the
w_riation of wall surfaces.
Select the
correct type of fasteners for your type
of wall construction.
If the water faucets and drain standpipe
are recessed, put hooked end of drain
hose in standpipe.
Tightly wrap the
plastic strap around the drain hose
and water inlet hoses (not the handles
or stems). Secure plastic strap.
l
i,:j
Advertisement
