Xerox 3150 - Phaser B/W Laser Printer User Manual page 71

4.8
P T
RINTING ASKS
Property
Make sure that Source is set to the
Source
3
corresponding paper tray.
The Tray 1(Manual) source is used when
printing to special materials. You have to load
one sheet at a time into the Tray 1. See
page 3.12.
If the paper source is set to Auto Select,
the printer automatically picks up print
materials according to the following order:
Tray 1, Tray 2.
If you load a different type of print material,
Type
4
select the corresponding paper type. For
more information on print materials, refer to
Chapter 3, "Using Print Materials."
To use recycled paper, which weighs from
20lb to 24lb, or other colored paper, select
Colored Paper.
This property allows you to print the first
page using a different paper type from the
rest of the document. You can select the
paper source for the first page.
Cover
5
Page
For example, load thick stock for the first
page into the Tray1, and plain paper into the
Tray2. Then, select Tray2 in the Source
option and Tray1 in the Cover Page option.
Description