Xerox 3150 - Phaser B/W Laser Printer User Manual page 59

3.20
U P
SING RINT
3
Adjust the guide to fit the width of the transparencies.
4
When you print on transparencies, select the appropriate
paper source, type, and size in the software application. For
details, see page 4.7.
5
After printing, close the Tray 1 and the rear output tray.
N :
OTES
• If you print on thin transparencies to the rear output tray, they
can curl. In this case, use the top output tray. If the problem
persists, make sure your transparencies meet the printer's
specifications.
• To prevent transparencies from sticking, do not let the printed
sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
M
ATERIALS