NEC 4650NX - SuperScript Color Laser Printer Network Manual page 62

With the SuperScript 4200, 4000, or 4600 Series printer you
can find out what file types are currently supported by the
Pull Printing server by reviewing the kickIE.ini file
located in the cgi-bin directory on the Pull Printing Server.
For files types supported for the 4650 Series printer, see
below. If you find other plug-ins for Internet Explore 5.0 or
higher, you can add the file types supported by the plug-ins
to the inetpub\cgi-bin\kickIE.ini file, under the
Support Type tag. Please remember to increase the value of
the Number Of Types variable.
Starting the Pull Printing Server
Launch the Pull Printing server from the Windows Start
button, selecting Programs then NEC PrintAgent Pull
Service, and then selecting Start all (or for Windows NT,
4650 Series printers select Start DP Server).
Enabling File Extensions
With the 4650 Series printer, even more program file
extensions are supported. But they must be enabled. To
enable file extensions follow these steps.
1. From the main Driverless Print Server dialog box, select
Edit, then File Types from the Menu bar.
2. In the File Types dialog box, select the extension of the
application you want to use. The application must be
loaded on the server.
3. Make sure Support File Type Extension is selected.
58 SuperScript Color Laser Network Guide
4. Select the Driverless Print Server radio button.
5. Click on the Save Button
6. Repeat this procedure with each extension you want to
enable.
7. For more details, click on the Help button.
8. Click on the Close button when you are finished.