Adding The Peer-To-Peer Printer - NEC 4650NX - SuperScript Color Laser Printer Network Manual

4. Click the OK button to accept the defaults.
note: Select
The and
Available Printers
the items on the
Flags
means the printer is selected and that this printer
port will be shown on the
Options P
. The indicates that even if you press the
button, the item will remain on the list. It does not mean
that once the item is permanent, it will also be included in
Port Options
the . Only selected items will be displayed
Port Options
in the .
5. Continue to "Adding the Peer-to-Peer Printer."
Additional Information about this IPX Setup Box
Use these other buttons if you want to make changes in the
IPX Setup dialog box:
The Clear button is used to clear the Available Printers list.
The Find Printers button is used to refresh the Available
Printers list. All Peer-to Peer capable printers in the network
are displayed in the list.
IPX Peer-to-Peer for 4600, 4400, and 4200 Series Printers
1. Insert the printer driver CD that came with your printer,
for example, SuperScript 4400 Series CD.
2. Press the Windows Start button and select Run.
At Run, type: <drive>:\p2pipx\Setup.exe
Then click OK. Follow the Install wizard prompts.
3. When the Installation Complete dialog box is displayed,
click Finish button, then complete the installation.
22 SuperScript Color Laser Network Guide
Permanent
buttons manipulate
S
list. An under
Printers Details
tab under
Clear

Adding the Peer-to-Peer Printer

1. In Windows 95/98, press the Start button, select
Settings, then select Printers.
2. In the Printers window, double-click Add Printer. Then
Port
Add Printer wizard will launch and click Next.
3. When the Add Printer wizard asks how the printer is
attached, select Local printer and click Next.