Kyocera 9130DN - B/W Laser Printer Operation Manual page 61

Message
RAM disk error ##
Press GO
Virtual mailbox
full
USB mem. removed
Press GO
USB memory err05
Press GO
Unknown toner
installed
:Alarm buzzer sounds when an error occurs. Press [CANCEL] to stop the alarm buzzer.
OPERATION GUIDE
Look at the error code given in place of ## and refer to the corresponding
description given below.
01: Format error. Try turning the power off and on again.
02: RAM disk mode is Off. Turn RAM disk mode On.
04: No disk space. Clean up files.
05: Specified file is not on disk.
06: No memory for use by disk system. Expand printer memory.
The storage area for the VMB is full. Print out accumulated VMB data.
The USB flash memory is accidentally removed from the printer. To ignore the
USB memory error, press [GO]. The message display returns to Ready.
The designated file does not exist. Check the designated file name and existence
of the file in the USB memory.
The installed toner container is displayed if determined not to be an original
Kyocera toner container by the self-diagnostic performed after power is switched
on.
If this message is displayed, the amount of toner remaining cannot be checked.
Corrective Action
Troubleshooting
4-13