Transparency Interleaving; Interleaving Transparencies - Kyocera 4020DN - FS B/W Laser Printer User Manual

Transparency Interleaving

Interleaving Transparencies

1
KX DRIVER
Check Box Selection
Page insert
Print onto front
Page insert
Print onto back
Page insert
Print onto front
Print onto back
Transparency interleaving inserts a backing sheet between printed
transparencies. The backing sheet, also known as an interleaf, helps keep
transparencies clean and prevents them from clinging together. This feature is
only available when printing on transparencies supplied from the MP tray. You
can print the same content on the backing pages as on the transparencies.
Transparency interleaving cannot be used together with Cover mode or
Page insert.
To insert backing sheets between transparencies, follow these steps:
In the Basic tab, in the Media type list, select Transparency. If the Source and
Media type lists have been combined (by a selection in the Device Settings
tab, in the Compatibility Settings dialog box), Media type does not appear.
Instead, in the Source list select Auto (Transparency).
Page Insertion Type
Prints on the front side of the inserted
page.
Prints on the back side of the inserted
page.
Prints on both sides of the inserted
page.
Publishing
7-6