Table of Contents
Advertisement
I
Mix Multi-Purpose Powdered Cleaner following the directions on
the
Use suds only and apply.with a clean sponge.
Don't saturate the material.
Don't rub it roughly.
As soon as you've cleaned the section, use a sponge to remove the
Rinse the section with a clean, wet sponge.
0
Wipe off what's left with a slightly damp paper towel or cloth.
0
Then dry it immediately with a blow dryer or a heat lamp.
container label.
~
suds.
'
NOTICE:
Bexareful. A blow dryer may scorch the fabric.
Wipe.with a clean cloth.
l
Using Solvent-Qpe Cleaner on Fabric
First, see if you have to use solvent-type cleaner at all.. Some spots and
stains will clean .offbetter with just water and mild soap.
If you need to use a solvent:
0
Gently scrape excess soil from the trim material with a clean, dull knife
(preferably cheesecloth). Cleaning should start at the-outside of the
stain, "feathering" toward the center. Keep changing to a clean section
of the cloth.
blow dryer to help prevent a cleaning ring. (See the previous
I
or scraper. Use very little cleaner, light pressure and clean cloths
1
When you clean a stain from fabric, immediately dry the area with a
NOTICE.),
b
6-52
Advertisement
Table of Contents
