Table of Contents
Advertisement
Programming Tracks
-
You can program up to 10 tracks for your listening pleasure.
1. .Press the RCL/PROG knob. CD and TRACK will appear in the
M
display. This also allows you to program disc track playback.
2. Within five seconds, turn the lower TUNE knob to the track you want
3. Press the SET button and the track number will stop flashing. This
to hear first. The track number will flash.
" -
.indicates that the track is programmed.
-
4. Repeat Steps 2-and 3 to program up to 9 more tracks.
5. Press the RCLPROG knob a se.cond time to be.gin playing the first
To cancel the programming mode,-press RCL/PROG and SET. If ALL is
showing on the display, allow 10 seconds to p:ass. You can also cancel the
programming mode by ejecting the disc.
SEEK Press this switch up or down to go to the beginning of the next or
previous track. At least eight seconds must have played for
the SEEK
SCAN: Press this switch up or down to sample about 15 seconds of the
beginning.of .each track. Press it again or the upper knob to stop the
Note that if you are in the program mode, it is possible to mod@ the
playback order by using the TUNE knob. If you need to review the
, -
playback order, use either the SEEK or SCAN switch. This review can be
stopped::by pressing the SCAN switch.
REV: Press and hold this button to return rapidly to a favorite passage.
the~reverse progress of the CD.
programmed track.
-
7
-
function to find the star.t of the current track.
, -
.SCAN function.
7
Release it to play the passage. The elapsed.time will be displayed to
S ~ O W
FWD: Press .and.hold this button to advance quickly within a track.
forward progress of the CD.
-
Re€ease it to resume playing. Elapsed. time will be displayed to show the
3-15
Advertisement
Table of Contents
