Advertisement
Windshield Wipers
You control the windshield wipers by turning the b a d
marked WI€%R.
@or a single wiping cycie, turn the band
to
- & S T i
Rdid
it there until the wipers start, then let go. The wipers will
stop after one cycle.
Lf
you want more cycles, hold the
band on MIST longer.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful
in
light rain or
snow. Turn the band to choose the delay time. The
closer to LO, the shorter the delay.
For steady wiping at low speed, turn the band away
from you to the LO position. For high speed wiping,
turn the band further, to HI. To stop the wipers, move
the band to OFF.
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wiper motor. A
circuit breaker will stop the motor until
it cools. Clear
away snow or ice to prevent an overload.
2-32
Advertisement
