Advertisement
Unlocking the System
Disabling THEFTLOCK
TM
If battery power is removed for any reason, LOC will
appear on the display when power is reapplied. You will
need to enter your code to unlock the system. You have
only 15 seconds between each of the following steps.
1.
2.
3.
4.
5.
Turn the ignition on. LOC will appear on the display.
Press MIN and "000" will appear on the display.
Press MIN again and hold until the last two digits of
your code appear.
Press and hold HRS until the first digit or digits of
your code appear.
Press AM FM after you make sure the code matches
the one you wrote down. SEC should appear on the
display, meaning you can now use your system, and
it is secured.
If you want to turn off THEFTLOCK", you will need
to enter your code. If you lose or forget your code, see
your dealer.
1. Press buttons 1 and 4 at the same time and hold until
"SEC" shows on the display.
You now have only 15 seconds between each of the
following steps.
2. Press MIN and "000" will appear on the display.
3. Press MIN again and hold until the last two digits of
4. Press and hold HRS until the first digit or digits of
your code appear.
your code appear.
5. Press AM FM after you make sure the code matches
the one you wrote down.
"-
-
-"
should appear on the
display, meaning your system is unsecured.
3-17
Advertisement
