Advertisement
If you accidentally use a key that has a damaged or
missing resistor pellet, the starter won't work and the
PASS KEY light will come on. But you don't have to
wait three minutes before trying another ignition key.
See your Buick dealer or a locksmith who can service
the PASS-Key% to have a new key made.
If you're ever driving and and the PASS KEY light
comes on and stays on, you will be able to restart your
engine if you
turn
it off. Your PASS-Key%I system,
however, is not working properly and must be serviced
by your Buick dealer. Your vehicle is not protected by
If you lose or damage a PASS-Key@II ignition key, see
your Buick dealer or a locksmith who can service
PASS-Key% to have a new key made.
the PASS-Key% system.
New Vehicle "Break-In"
NOTICE:
Your modern Buick doesn't need an elaborate
"break-in." But it will perform better in the long
run if you follow these guidelines:
Keep your speed at 55 mph (88 km/h) or
less for the first 500 miles (804
k m ) .
Don't drive at any one speed
--
fast or
slow
--
for the first 500 miles (804
km).
Don't make full-throttle starts.
200 miles (322
km)
or so. During this time
your new brake linings aren't yet broken
in. Hard stops with new linings can mean
premature wear and earlier replacement.
Follow this "breaking-in" guideline every
time you get new brake linings.
0
Don't tow a trailer during "break-in." See
"Towing a Trailer'' in the Index
for
more
information.
Avoid making hard stops for the
first
-~
~
2-14
Advertisement
