Table of Contents
Advertisement
Type of Caller ID (CID)
Dependant on your network sytem requirements the Caller ID settings may need to be
adjusted. If the telephone has been purchased in Australia this setting will be displayed
as 1/4.
1. Press
.
w
2. Scroll using
< <
3. Press
repeatedly until the display shows 1/5 - UK (1/4 - Australia).
repeatedly until the display shows 1/5 - UK (1/4 - Australia).
0
0
0
4. Scroll using
< <
1=BT for UK/Normal for Australia
2=CCA for UK/Polarity reversal for Australia.
5. Press
to confi rm setting and move to the next programming sequence, alternatively.
to confi rm setting and move to the next programming sequence, alternatively.
0
0
0
6. Press
to exit the Menu system.
w
Tone/Pulse Dialling (UK only)
Select dialling type (tone or pulse). The default setting is tone dialling, dependant on
your network system requirements this may not require changing.
This setting only applies to models purchased in the UK.
1. Press
.
w
2. Scroll using
< <
3. Press
repeatedly until the display shows 2/5.
repeatedly until the display shows 2/5.
0
0
0
4. Scroll using
< <
setting and move to the next programming sequence, alternatively.
5. Press
to exit the Menu system.
w
Line Adaptation
On some telephone networks and PBX systems, it may be necessary to adjust the
microphone level.
If the telephone has been purchased in Australia this setting will be displayed as 2/4.
1. Press
.
w
2. Scroll using
< <
3. Press
repeatedly until the display shows 3/5. - UK (2/4 - Australia).
repeatedly until the display shows 3/5. - UK (2/4 - Australia).
0
0
0
4. Scroll using
< <
Press
to confi rm setting and move to the next programming sequence, alternatively.
to confi rm setting and move to the next programming sequence, alternatively.
0
0
0
5. Press
to exit the Menu system.
w
www.doro.com
Settings
/
until
fl ashes in the display. Press
> >
w
/
to the desired setting:
> >
/
until
fl ashes in the display. Press
> >
w
/
to the desired setting (TONE/PULSE). Press
> >
/
until
fl ashes in the display. Press
> >
w
/
to the desired setting (A/B=normal, C=medium, D=low).
to the desired setting (A/B=normal, C=medium, D=low).
> >
> >
> >
.
0
0
0
.
0
0
0
to confi rm
to confi rm
0
0
0
.
0
0
0
English
15
Advertisement
Table of Contents
