VMware VSHIELD APP 1.0.0 UPDATE 1 Admin Manual page 98

vShield Administration Guide
Syntax
[no] ip name server A.B.C.D
Option
A.B.C.D
CLI Mode
Configuration
Example
vShield(config)# ip name server 192.168.1.3
or
vShield(config)# no ip name server 192.168.1.3
ip route
Adds a static route.
To delete an IP route, use no before the command.
Syntax
[no] ip route A.B.C.D/M W.X.Y.Z
Option
A.B.C.D
M
W.X.Y.Z
CLI Mode
Configuration
Example
vShield# configure terminal
vShield(config)# ip route 0.0.0.0/0 192.168.1.1
or
vShield(config)# no ip route 0.0.0.0/0 192.168.1.1
Related Commands
show ip route
manager key
Sets a shared key for authenticating communication between a vShield App and the vShield Manager. You can
set a shared key on any vShield App. This key must be entered during vShield App installation. If the shared
key between a vShield App and the vShield Manager is not identical, the service cannot install and is
inoperable.
Syntax
manager key KEY
Option
KEY
98
Description
IP address to use.
Description
IP address to use.
Subnet mask to use.
IP address of network gateway.
Description
The key that the vShield App and vShield Manager must match.
VMware, Inc.