VMware VSHIELD APP 1.0.0 UPDATE 1 Admin Manual page 105

Related Commands
debug copy
debug packet capture
debug show files
debug service
Enables logging for a service, noting the specific engine for the service and the severity of events to log. You
can run the show services command to view the list of running services.
To disable logging for a specific service, use no before the command.
Syntax
[no] debug SERVICE (ice|sysmgr|vdb|WORD) (low|medium|high)
Option
SERVICE
ice
sysmgr
vdb
WORD
low
medium
high
CLI Mode
Privileged
Usage Guidelines
vShield App CLI
Example
vShield# debug 2050001_SAFLOW-FTPD-Dynamic-Port-Detection sysmgr high
Related Commands
show services
debug service flow src
Debugs messages for a service that is processing traffic between a specific source-to-destination pair. You can
run the show services command to view the list of running services.
To disable logging, use no before the command.
Syntax
[no] debug SERVICE flow src A.B.C.D/M:P dst W.X.Y.Z/M:P
Option
SERVICE
A.B.C.D
M
P
VMware, Inc.
Description
Name of the service.
vShield App protocol decoding engine.
vShield App system manager.
Deprecated.
Reserved for technical support.
Low severity events.
Medium severity events.
High severity events.
Description
The name of the service.
Source IP address to use.
Source subnet mask to use.
Source port to use.
Appendix A Command Line Interface
105