VMware VSHIELD APP 1.0.0 UPDATE 1 Admin Manual page 108

vShield Administration Guide
Related Commands
ntp server
set clock
show configuration
Shows either the current global configuration or the configuration for a specified service on a vShield Edge.
Syntax
show configuration (dhcp | firewall | ipsec | lb | nat | syslog | system)
Option
dhcp
firewall
ipsec
lb
nat
syslog
system
CLI Mode
Basic, Privileged
Usage Guidelines
vShield Edge CLI
Example
vShieldEdge# show configuration system
show debug
Show the debug processes that are enabled. You must enable a debug path by running the debug packet or
one of the debug
Syntax
show debug
CLI Mode
Basic, Privileged
Usage Guidelines
vShield App CLI
Example
vShield# show debug
No debug logs enabled
Related Commands
debug service
debug service flow src
108
Description
Show the current DHCP configuration.
Show the current firewall configuration.
Show the current VPN configuration.
Show the current Load Balancer configuration.
Show the current NAT configuration.
Show the current syslog configuration.
Show the current global configuration.
service commands.
VMware, Inc.