MOTO GUZZI BREVA V1100 Manual page 21

To store the set level and go back to
SETTINGS function:
press the SET (2) push-button for
u
several seconds.
°C/°F
This function allows you to select the unit
of measurement for ambient temperature.
To enter the °C/°F function:
Confirm selection on °C/°F by pressing
u
the SET (2) push-button for several
seconds.
T h e d i s p l a y s h o w s t w o u n i t s o f
measurement:
√ °C
√ °F
Units of measurement can be selected in a
sequence by briefly pressing the SET(2)
push-button.
To store the selected range and go back to
SETTINGS function:
press the SET (2) push-button for
u
several seconds.
KM/MILES
This function allows you to select the unit
of measurement for speed.
To enter the "KM/MILES" function:
Confirm selection on "KM/MILES" by
u
pressing the SET (2) push-button for
several seconds.
T h e d i s p l a y s h o w s t w o u n i t s o f
measurement:
√ KM
√ MILES
Units of measurement can be selected in a
sequence by briefly pressing the SET(2)
push-button.
To store the set unit and go back to
SETTINGS function:
press the SET (2) push-button for
u
several seconds.
12H/24H
This function allows you to select the time
format.
To enter the 12H/24H function:
Confirm selection on "12H/24H" by
u
pressing the SET (2) push-button for
several seconds.
The display shows two formats:
√ 12H
√ 24H
The formats can be selected by briefly
pressing SET (2).
To store the chosen format and go back to
SETTINGS function:
u press the SET (2) push-button for
several seconds.
IMMOBILIZER LED
This function allows you to enable/disable
the alarm led flashing inside the fuel level
gauge indicator.
It is used in case an external antitheft
system is connected to the vehicle.
CHANGE THE CODE
Allows the user to change his personal
code. During the procedure the user is
prompted to enter the old code.
CODE RECOVERY
Allows the user to set a new user code
when the old one is not available. During
the procedure the user is prompted to
insert 2 of the programmed keys.
DIAGNOSIS
This function interfaces with the systems
fitted to the motorcycle to carry out
diagnosis. To enable the function, a
password is needed that is available only
to Moto Guzzi service centres.
LANGUAGE
This function allows you to choose the
language of any message displayed.
To enter the LANGUAGE function:
Confirm selection on LANGUAGE by
u
pressing the SET (2) push-button for
several seconds.
Available languages are:
√ ITALIANO
√ ENGLISH
√ FRANCAIS
√ DEUTSCH
√ ESPAGNOL
The languages can be selected by briefly
pressing SET (2).
To store the set unit and go back to
LANGUAGE function:
press the SET (2) push-button for
u
several seconds.
use and maintenance Breva
21